|
Option |
Code |
Description |
Increment |
Range |
Example |
|
A: Unthreaded Length |
00 - 88 |
Length in inches |
0.1 in |
0.0 - 8.8 in |
04 = 0.4 in |
|
B: Overall Case Length |
08 - 96 |
Standard thread length in inches |
0.1 in |
0.8 - 9.6 in |
24 = 2.4 in |
|
C: Total Length |
5 |
0.5 metre (1.6 feet) |
— |
— |
— |
|
10 |
1.0 metre (3.3 feet) |
— |
— |
— |
|
|
15 |
1.5 metres (4.9 feet) |
— |
— |
— |
|
|
20 |
2.0 metres (6.6 feet) |
— |
— |
— |
|
|
50 |
5.0 metres (16.4 feet) |
— |
— |
— |
|
|
D: Connector Option |
2 |
Miniature ClickLoc coaxial connector |
— |
— |
— |
|
12 |
Miniature ClickLoc coaxial connector, FluidLoc cable |
— |
— |
— |
|
|
E: Agency Approval |
0 |
Not required |
— |
— |
— |
|
5 |
CSA, ATEX, IECEx Approvals |
— |
— |
— |
The 3300 XL 8 mm Proximity Transducer System consists of:
One 3300 XL 8 mm probe.
One 3300 XL extension cable1, and
One 3300 XL Proximitor* Sensor2.
The system provides an output voltage that is directly proportional to thedistance between the probe tip and the observed conductive surface and canmeasure both static (position) and dynamic (vibration) values. The system'sprimary applications are vibration and position measurements on fluid-filmbearing machines, as well as Keyphasor* reference and speed measurements3The 3300 XL 8 mm system delivers the most advanced performance in our eddycurrent proximity transducer systems. The standard 3300 XL 8 mm 5-metresystem also fully complies with the American Petroleum institute's (APl) 670Standard (4th Edition) for mechanical configuration, linear range, accuracy, andtemperature stability. All 3300 XL 8 mm proximity transducer systems providethis level of performance and support complete interchangeability of probesextension cables, and Proximitor sensors, eliminating the need to match orbench calibrate individual components
Each 3300 XL 8 mm Transducer System component is backward-compatible andinterchangeable* with other non-XL 3300 series 5 mm and 8 mm transducersystem componentss. This compatibility includes the 3300 5 mm probe, forapplications in which an 8 mm probe is too large for the available mountingspace
