Outputs
Front Panel LEDs
OK LED
Indicates when the 3500/42M Proximitor Seismic Monitor is operating properly.
TX/RX LED
Indicates when the 3500/42M Proximitor Seismic Monitor is communicating with other modules in the 3500 rack.
Bypass LED
Indicates when the 3500/42M Proximitor Seismic Monitor is in Bypass Mode.
Buffered Transducer Outputs
Output Impedance
550 Ω
Transducer Power Supply
-24 Vdc
Connectors
Front Panel Connectors
The front of each monitor has one coaxial connector for each channel.
Protection
Each connector is short-circuit protected.
3500/42M Proximitor Seismic Monitor:
Protects machinery by continuously comparing monitored parameters against configured alarm setpoints to trigger alarms.
Communicates essential machine information to both operations and maintenance personnel.
The 3500/42M Proximitor Seismic Monitor is a four-channel monitor that accepts input from proximity and seismic transducers. It conditions the signal to provide vibration and position measurements, then compares the conditioned signals with user-programmable alarms.
You can program each channel using the 3500 Rack Configuration Software to monitor and report the following:
Radial vibration
REBAM
Thrust position
Acceleration
Differential expansion
Shaft absolute
Eccentricity
Circular acceptance region
Velocity
