Part Number: 330703-000-060-90-02-00
Model: 3300 XL 11 mm Proximity Probes
Manufacturer: Bently Nevada
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
|
Model |
330703 |
3300 XL 11 mm Probe, M14 x 1.5 thread, without armor |
|
Unthreaded Length Option |
000 |
0 mm |
|
Overall Case Length Option |
060 |
60 mm |
|
Total Length Option |
90 |
9.0 metres (29.5 feet) |
|
Connector and Cable-Type Option |
02 |
Miniature coaxial ClickLoc connector, standard cable |
|
Agency Approval Option |
00 |
Not required |
The 3300 XL 11 mm Proximity Sensor System includes
- 3300 XL 11 mm probe
- 3300 XL 11 mm extension cable
- 3300 XL 11 mm Proximitor® Sensor
The 3300 XL 11 mm Proximity Sensor System has a 3.94 V/mm (100 mV/mil) output for non-contact vibration measurements. 3300 XL 11 mm proximity sensor system with 3.94 V/mm (100 mV/mil) output for non-contact vibration measurements on fluid membrane bearing machines for non-contact vibration and displacement measurements. 11 mm large tip allows this sensor system to be longer linear range than our standard 3300 XL 8 mm sensor system. It is primarily used in the following applications that require a longer linear range applications with longer ranges:
- Axial (thrust) position measurement
- Differential slope expansion measurement in steam turbines
- Rod position or rod drop measurements in reciprocating compressors
- Tachometer and zero speed measurements
- Phase reference (Keyphasor®) signals
The 3300 XL 11 mm Proximitor Sensor is designed to replace the 7200 Series 11 mm and 14 mm sensor systems.
The 3300 XL 11 mm Proximitor Sensor is designed to replace the 7200 Series 11 mm and 14 mm sensor systems. When upgrading from the 7200 Series
system to the 3300 XL 11 mm system, each component must be replaced with a 3300 XL 11 mm component.
3300 XL 11 mm components. In addition, the monitoring system must be updated.
Update. If using the 3500 Monitoring System, the configuration software version must be updated.
If using the 3500 Monitoring System, the configuration software needs to be updated to include the 3300 XL 11 mm Sensor System as a compatible option.
The configuration software version needs to be updated to include the 3300 XL 11 mm sensor system as a compatible option. Existing 3300 monitoring systems may require modification.
Modifications.
