Power Specifications：
Local Bus Power：12 VDC at 150 mA
Bussed Field Power：24 VDC at 100 mA
Field Circuit：24 VDC at 5 mA/Ch
Environmental Specifications：
Ambient Temperature:-40 °C to +70 °C
Shock:10 g half-sine wave for 11 ms
Vibration:1 mm peak to peak from 2 to 13.2Hz; 0.7 g from 13.2 to 150 Hz
Airborne Contaminants: ISA-S71.04 –1985 Airborne Contaminants Class G3
Relative Humidity: 5 to 95% Non-Condensing
Terminal block key position: B1
Removal and Insertion:
Field power supplied to this device, either at the field terminal or as bussed field power through the Carrier, must be removed before removing or connecting the device.
An I/O loop assessment must be complete on all energy limited nodes.
This unit cannot be removed or inserted with system power energized.
Non-sparking field circuits MUST be de-energized before removing and inserting including the fused terminal block.
A rotary keying system ensures compatibility between I/O cards and terminal blocks after installation is complete. The terminal block must have the keys set for the I/O card with which it is to be used.
